en
Advanced Oxidation Plant
Advanced Oxidation Plant

Advanced Oxidation Plant for Clean Water Solutions

Brand: WTEYA GROUP
MOQ: 10 Pieces
Delivery time: 15 Day
Advanced oxidation plant uses advanced oxidation technology to produce free radicals with strong oxidation capacity, effectively degrade organic pollutants in wastewater, and oxidize macromolecular organic matter that is difficult to degrade into small molecules, so as to achieve sewage purification. It is suitable for a variety of industrial wastewater treatment, with high treatment efficiency, fast reaction speed, no secondary pollution and so on.
WTEYA provides professional advanced oxidation plant, one-stop service, we not only have standardized products of advanced oxidation plant, but also provide OEM and ODM customized services, we are looking for partners, agents in countries around the world.
Product Details

Product introduction

Introduction to advanced oxidation plant

Advanced oxidation equipment as a mobile or fixed UV catalytic oxidation equipment, with high efficiency and stability, suitable for a wide variety of wastewater, simple installation and commissioning, small footprint and other characteristics, can be used to treat a variety of organic pollutants or heavy metal ions of the wastewater treatment, equipment components material according to the type of wastewater optimization.
All operating parameters of advanced oxidation integrated equipment are optimized, which can be fully automatic operation or semi-manual operation according to demand. The core component of the equipment UV lamp, whether the power selection or the UV lamp itself, has been optimized or selected. Compared with traditional UV wastewater treatment systems, the total power of UV lamps is reduced by more than 80%, and the operating and investment costs are low. The reduction of UV lamps reduces the maintenance difficulty of the system.

 

Advanced oxidation plant composition

The core system of the advanced oxidation integrated equipment is the ultraviolet catalytic equipment, and the rest is composed of pumps, instruments, electronic control systems, valves, pipelines and other systems around the ultraviolet catalytic equipment.

 

Advanced oxidation plant features

Adopt new technology to meet various standard requirements.
Wide range of application: all kinds of organic wastewater or heavy metal ion wastewater, no specific type restrictions.
The modular combination design of skid assembly is realized, the assembly and disassembly are fast and convenient, the floor area is small, and the construction period is short.
The system is stable, energy saving, high degree of automation, and easy to operate.
Convenient maintenance and management, lower investment and operating costs.
There is no limit to pollutant loads, which are limited only by operating costs.

 

Advanced oxidation plant applications

All kinds of organic pollutants, wastewater containing heavy metal ions, wastewater containing phosphorus treatment direct standard treatment. The biodegradability of wastewater containing organic pollutants is improved.

 

Technical principle of

Advanced oxidation processes (AOPs) technology, also known as deep oxidation technology, is characterized by the generation of free radicals with strong oxidation capacity (hydroxyl radical (·OH), sulfate radical (SO-4 ·) and superoxide anion radical (O-2 ·), etc.). It is a method of oxidative degradation of organic matter under the conditions of high temperature and pressure, electricity, light or/and catalyst. According to the way of generating free radicals and the different reaction conditions, it can be divided into photocatalytic oxidation, wet oxidation, acoustochemical oxidation, ozone oxidation, electrochemical oxidation, Fenton oxidation and so on.

 

UV/Fenton process is a deep oxidation technology, that is, the chain reaction between Fe2+ and H2O2 is used to catalyze the formation of OH free radicals. OH free radicals have strong oxidation properties and can oxidize various toxic and difficult-to-degrade organic compounds to achieve the purpose of removing pollutants. It is especially suitable for the oxidation treatment of organic wastewater which is difficult to biodegrade or general chemical oxidation is difficult to work. The main factors affecting the treatment of landfill leachate by UV/Fenton process are pH, dosage of H2O2 and dosage of iron salt.

 

Only from the perspective of current engineering practice, UV/Fenton method is the most promising among advanced oxidation methods. The main advantages are: the COD value reduction effect is good and the cost is low. From the perspective of operating cost alone, it is only higher than or equal to the UV/TiO2 method. Much lower than UV/O3(including O3 catalytic oxidation) or PMS oxidation methods. Therefore, globally, among advanced oxidation methods, only Fenton or UV/Fenton have more successful application cases in the field of wastewater treatment, while other advanced oxidation technologies have fewer successful cases due to investmentoperating costs or other factors.

 

The main process is described as follows:

The wastewater first enters the conditioning tank for water quality homogenization, and then enters the subsequent pretreatment system for pretreatment. The pretreatment process can achieve demulsification and remove the opaque suspended matter from the water, and at the same time, the pretreatment can also reduce the organic pollutants in the wastewater to a certain extent, and reduce the cost and difficulty of subsequent treatment.

   The wastewater after pretreatment enters the intermediate tank for temporary storage. The wastewater in the intermediate tank is tested by the on-line detection system for the required pollutant content, and its parameters are used as the basic parameters of the automatic control system to control the dosage of subsequent drugs. Control of the dosage of subsequent drugs, such as catalysts and oxidants, can be either manually or automatically controlled.

After dosing the wastewater in the dosing tank, it goes into the UV oxidation tank for UV treatment. After UV treatment, the wastewater is discharged into the subsequent pH callback pool, adding the optimized agent and adjusting the pH value, and then into the subsequent flocculation precipitation system for precipitation treatment. The wastewater after precipitation treatment can be discharged directly.

After treatment, the content of various pollutants, such as COD value or heavy metal ions, has been effectively reduced. If subsequent biochemical treatment is required, the biodegradability of the wastewater is improved.

Production of equipment

advanced oxidation plant

 

Capacity and size

Device name

Processing capacity (tons/day)

UV Lamp Power (kW)

Installed power (kW)

Operating power (kW)

Equipment size

(L×W×H

(m)

Advanced oxidation

Integrated equipment

200

2.5

15

10

6×2.1×2.2

400

5.0

30

25

12×3×3

600

7.6

45

40

2.1×5.8×2.1

800

10

60

50

6.5×2.8×2.8

 

Frequently Asked Questions

Q: What if the fluid channel of the tube heat exchanger is blocked?
A: Regular maintenance and cleaning, if it is a serious blockage may need to shut down and mechanical cleaning or chemical cleaning.

Q: How to improve the heat exchange efficiency of tubular heat exchangers?
A: The flow rate of the fluid can be optimized to ensure that there is no scaling and blockage; Select efficient heat exchanger materials and appropriate flow path design in the design phase; Maintaining the right temperature gradient is also key to improving efficiency.

Q: Why does corrosion occur in tubular heat exchangers?
A: Corrosion may be due to the presence of corrosive substances in the fluid or due to improper material selection. Solutions include using corrosion-resistant materials, such as stainless steel, or adding preservatives.

Q: What if there is a leak in the tube heat exchanger?
A: You first need to determine the location of the leak, which may be caused by tube wear, joint damage or aging of the gasket. Depending on the location and extent of the leak, the damaged part may need to be repaired or replaced.

Q: How does the fluid flow direction of tubular heat exchanger affect the heat transfer effect?
A: In general, counterflow (that is, the hot fluid and the cold fluid flow in opposite directions) provides a higher heat exchange efficiency, because this way can obtain a more uniform heat transfer driven by the temperature difference. Parallel flow (two fluids flowing in the same direction) may be suitable for some specific applications, but it is less efficient.