3T/H reverse osmosis project case

Basic information about the project
Project name: 3T/H reverse osmosis project
Company name: Guangdong Jinsheng Intelligent Group Co., LTD

Process flow
Pretreatment (quartz sand + activated carbon filter) + secondary membrane treatment +EDI device

Process characteristics
(1) The reverse osmosis membrane separation process needs to be carried out under high pressure, so the process process should be equipped with high pressure pump and high pressure pipeline reverse osmosis membrane separation process has low energy consumption, no phase, and can be carried out at room temperature, so it can be better used for the separation and concentration of thermal sensitive substances.
(2) can effectively remove ions, molecules, organic colloids, bacteria, etc., suitable for treating water with high salt content.
(3) It has a high desalting rate and water reuse rate.
(4) The membrane separation device is simple and easy to automate.
(5) During the separation process, it is easy to produce membrane pollution, so it is necessary to clean the membrane regularly.
(6) In order to prevent membrane pollution, raw water needs to be pre-treated to a certain extent, and after reaching the standard of various indicators, it will enter the reverse osmosis membrane separation device.