en
Picture of the case
Picture of the case

25T/H pure water equipment water treatment system project case

29 May, 2024 2:50pm

xxxx

Basic information about the project
Project name: 25T/H pure water equipment water treatment system project
Company name: Yunnan Zijing New Material Co., LTD

 

Process flow
Pretreatment (quartz + activated carbon filter) + softening + secondary membrane treatment +EDI device

 

Process characteristics
(1) The reverse osmosis membrane separation process needs to be carried out under high pressure, so the process process should be equipped with high pressure pump and high pressure pipeline reverse osmosis membrane separation process has low energy consumption, no phase, and can be carried out at room temperature, so it can be better used for the separation and concentration of thermal sensitive substances.
(2) can effectively remove ions, molecules, organic colloids, bacteria, etc., suitable for treating water with high salt content.
(3) It has a high desalting rate and water reuse rate.
(4) The membrane separation device is simple and easy to automate.
(5) During the separation process, it is easy to produce membrane pollution, so it is necessary to clean the membrane regularly.
(6) In order to prevent membrane pollution, raw water needs to be pre-treated to a certain extent, and after reaching the standard of various indicators, it will enter the reverse osmosis membrane separation device.

xxxxxxxxxxxxxx